1955-1956 Chevy Corvette Forged Steel LEFT Rear Axle 17 Spline
1955-1956 Chevy Corvette Forged Steel LEFT Rear Axle 17 Spline

1955-1956 Chevy Corvette Forged Steel LEFT Rear Axle 17 Spline

Item Id: C-06-041L
Review this item
Your Price: $225.00

Availability: In Stock

Choose Options
ADDITIONAL NEW PARTS
Pressed-on Bearing & Backing Plate [+$115.00]
Installed Axle Studs [+$20.00]
New Bearing Retainer Hardware [+$12.00]
New Bearing ONLY (not pressed on) [+$40.00]
BACKING PLATE
I have a good backing plate that I will send you to avoid the additional charge of [+$50.00]
I do NOT have a backing plate please add the additional charge of [+$50.00]
ADDITIONAL INFO
Disk Brakes
Drum Brakes
Standard Axle Studs 1 1/4" (Drum Brakes Only)
Long Axle Studs 1 3/4" (Drum/Disc Brakes)
Quantity

Description

This 1955-1956 Corvette LEFT/DRIVER'S SIDE rear axle is a reproduction of the original GM Chevrolet part.  This product is made in the USA!  Picture does not show studs. Studs are pressed in. ; Don't settle for the old cast steel when you can get these beautiful forged steel axles.  Southeast Chevrolet Parts uses the highest quality alloy for these reproduction shafts. Our axles have been induction heat treated, fully magna-fluxed, and forged with a hardened bearing seat to ensure a long lasting axle.  Made to order, please allow 4 to 5 days.  The bearing, or backing plate may be purchased for an additional cost.

YEARSIDELENGTH*SPINEGM#
1955-1956Left 28 4/16"173714781
1955-1956Right29 13/16"173714782
1957 no P/TrackLeft28 8/16"173739107
1957 no P/TrackRight29 15/16"173739108
1957 P/TrackLeft28 6/16"173743837
1957 P/TrackRight29 13/16"173743847

* Note location for determining axle length is different than GM specs

  • Bolt Pattern: 5x4 3/4
  • Related Items


    Submit