This 1958 Chevy Impala OEM Standard Spindle is an original GM part that has been restored. The left and right spindles are interchangeable. The spindles have been media blasted and painted except for where the bearing rides which has been wire brushed. The threads have been chased and the unit is ready for installation.
Measurements (see diagram)
A = 9 13/16"
B = 3 7/8"
Spindle washer and nut may be purchased at an additional cost
Fits: Impala, Bel Air, Belair, Biscayne, Delray, Brookwood, Nomad, Yeoman
Fits: Hardtop, Sedan, Convertible, Wagon
Center to center distance between the holes is 3 1/8"