1961-1964 Chevy 2-Door Hardtop Original Rear Seat Set OEM RESTORED
1961-1964 Chevy 2-Door Hardtop Original Rear Seat Set OEM RESTORED

1961-1964 Chevy 2-Door Hardtop Original Rear Seat Set OEM RESTORED

Item Id: L-07-028
review 2 Review(s)
Write a Review Questions (See 4 Questions)
Your Price: $850.00

Availability: In Stock

Choose Options
1961 Bubble Top [+$250.00]
1962 Bubble Top (no speaker housing) [+$300.00]
Non-Bubble Top
I understand that I must call/email SEChevy in order to get an accurate price and shipping cost


These 1961-1962-1963-1964 original Chevrolet Impala or Bel Air 2-door hardtop seats have been fully restored. We strip the upholstery, fix all broken springs and deterioration, and give it a fresh coat of primer so that they are ready for the upholstery shop. It's an unbeatable price to make them look so nice! You can call to inquire about a used set of seats for a discounted price, but our inventory is limited.  

  • Will give credit for good core. Call 407.886.1963 for more details.
  • Will sell individual seats
  • Base Fits all Impala and Bel Air 2-Door Hardtop models
  • Backrest Fits all 2-Door Hardtop models EXCEPT Bubble Top
  • Customer Reviews

    Rating1964 chevy II non-post

    "I'm looking for a rear seat top and bottom for my 64 chevy II nova two door."

    Reviewed by:  from 1127 Villanova ave, Swarthmore, Pa , 19081. - 6/1/2017

    Did you find this helpful?

      1 of 1 Found Helpful

    Rating64 chevy impala 2-door hardtop

    "do you have the bottom seat springs for a 64 impala 2-door hardtop?"

    Reviewed by:  from Oklahoma City. - 5/13/2021

    Did you find this helpful?

      0 of 1 Found Helpful
    Questions about this item? Ask here.Questions about this item? Ask here. (See 4 Questions)
    Questions and Answers
    Q:Is a 1963 Impala SS a bubble top? A 1847 for real Asked by:  - 8/17/2014 (Submit an answer)
    A: "Bubble Top" refers only to the 1961-1962 models and not the 1963-1964. The Bubble Top rear seat is slightly shorter and very rare.
    Was this answer helpful?   3 of 6 Customer(s) found this Answer helpful.

    Answer provided by:  
    Q:what else would i need with this besides upholstering and foam? meaning is there any brackets needed or frames? Asked by:  - 9/19/2014 (Submit an answer)
    A: The rear seats don't need anything else ... No brackets, no hardware, nothing. General Motors made the rear seats to slide into place. The brackets are already attached to the floor or back.
    Was this answer helpful?   1 of 3 Customer(s) found this Answer helpful.

    Answer provided by:  
    Q:Will this frame fit a 1964 Chevy II SS? Asked by:  - 10/6/2014 (Submit an answer)
    A: No. Chevy II has a different rear seat.
    Was this answer helpful?   0 of 1 Customer(s) found this Answer helpful.

    Answer provided by:  
    Q:Im chasing rear lower bench seat only. for a 1958 belair for a 2 door hardtop sports coupe 348 engine all original. do you sell them separate with out back rest?? and top condition if so what's the item part # for ordering it on line ? im from western Australia, city Perth, address 4 scales way, suburb Spearwood , zip 6163 what will postage cost ? Asked by:  - 11/24/2014 (Submit an answer)
    A: We do sell the 1958 Chevy Rear Seat for a 2-door hardtop. It is part # LU-07-003. Typically we sell them as pairs, but in your case we may be able to just sell you the bottom seat. The best thing to do is to submit a request via the "Contact Us" form at the top of the page. Submit your address and indicate if it is business or residential (business is usually cheaper). Or you can contact Danny directly at [email protected]
    Was this answer helpful?   0 of 2 Customer(s) found this Answer helpful.

    Answer provided by:  

    Related Items

    Browse Similar Items

  • 1958-1964 Chevy > Interior

  • Submit